P520 20" Plug-End Garage Door Spring (.207" #5 Wire)
Save on 20 in. Plug End Spring for 1-Piece Garage Doors!
 
Alternative Views:


P520 20 in. Plug End Garage Door Spring
  • Direct replacement for Holmes-type springs used on garage doors equipped with the E900 jamb type hardware kit as well as certain toy haulers
  • Replacement spring for one piece / tilt-up garage doors
  • Safety containment to prevent it from coming loose
  • Handles 105 - 175 lb. for single door garages and 200 - 350 lb. for double door garages
  • Minimum 1 in. low headroom required
  • Length Over Coils: 20 in.
  • Outside Diameter: 1-5/8 in.
  • Wire Diameter & Gauge: (.207) #5
  • Initial Tension: 135-145 lbs
  • Max. Allowable Stretch: 16 in.
MSRP: $39.99
Your Price: $29.99
Qty:

Description Technical Specs Spring Selection Chart
 

The P520 20" Plug-End Garage Door Spring is a Holmes spring replacement for 7 ft. or higher one piece garage doors. Two springs are required to operate the 7 ft. one piece door. This product is perfect for DIY garage door repair.

  • Replacement spring for one piece / tilt-up garage doors
  • Safety containment to prevent it from coming loose
  • Handles 105 - 175 lb. for single door garages
  • Handles 200 - 350 lb. for double door garages
  • Minimum 1 in. low headroom required
  • Length over coils = 20 in.
  • Outside diameter = 1-5/8 in.
  • Wire diameter gauge = (0.207) #5
  • Initial tension = 135-145 lbs.
  • Maximum allowable stretch = 16 in.
Download spring installation guide >>

Share your knowledge of this product. Be the first to write a review »