P730 30" Plug-End Garage Door Spring (.177" #7 Wire)
Save on 30 in.Plug End Spring for 1-Piece Garage Doors!
 
Alternative Views:


P730 30 in. Plug End Garage Door Spring
  • Direct replacement for Holmes-type springs used on garage doors equipped with the E900 jamb type hardware kit as well as certain toy haulers
  • Replacement spring for one piece / tilt-up garage doors
  • Safety containment to prevent it from coming loose
  • Handles 200 - 250 lb. garage doors
  • Minimum 1 in. low headroom required
  • Length Over Coils: 30 in.
  • Outside Diameter: 1-5/16 in.
  • Wire Diameter & Gauge: (0.177) #7
  • Initial Tension: 110-120 lbs.
  • Maximum Allowable Stretch: 20 in.
MSRP: $39.99
Your Price: $29.99
Qty:

Description Technical Specs Spring Selection Chart
 

The P730 30-Inch Plug-End One Piece Garage Door Spring is a Holmes spring replacement for a heavier 2 car, 16 ft. one piece garage door. This one piece garage door spring is for a 16 ft. wood door or a larger Aluminum one piece garage door. Normally, 2-4 springs are required to operate the 16 ft. one piece garage door.

  • Replacement spring for one piece / tilt-up garage doors
  • Safety containment to prevent it from coming loose
  • Handles 200 - 250 lb. garage doors
  • Minimum 1 in. low headroom required
  • Length over coils 30 in.
  • Outside diameter = 1-5/16 in.
  • Wire diameter gauge = (0.177) #7
  • Initial tension = 110-120 lbs.
  • Maximum allowable stretch = 20 in.
Download Holmes spring installation instructions Download spring installation guide >>

Share your knowledge of this product. Be the first to write a review »