SL732 32-Inch Lock-End Garage Door Spring (.177") #7 Wire
Save on 32 in. Lock-End Spring for 1-Piece Garage Doors!
 
Alternative Views:


SL732 32 Inch Lock End Garage Door Spring is used as a spring replacement for heavier 2 car 16 ft. one piece garage doors. This one piece garage door spring is for a 16 ft. wood door or a larger Aluminum one piece garage door. Normally 2-4 springs are required to operate a 16 ft. one piece door. This product is perfect for DIY garage door repair.

Technical Details (SL732 32-Inch Lock-End Garage Door Spring)
  • Direct replacement for Holmes-type springs used on garage doors equipped with the E900 jamb type hardware kit as well as certain toy haulers
  • Safety containment to prevent it from coming loose
  • Handles 200 - 300 lb.
  • Minimum 1 in. low headroom required
  • Length over coils = 32 in.
  • Outside diameter = 1-5/16 in.
  • Wire diameter gauge = (0.177) #7
  • Initial tension = 110-120 lbs.
  • Maximum allowable stretch = 21.25 in.
MSRP: $54.99
Your Price: $39.99
Qty:

Description Technical Specs Spring Selection Chart
 
SL732 32 Inch Lock End Garage Door Spring is used as Holmes spring replacement for heavier 2 car 16 ft. one piece garage doors. This one piece garage door spring is for a 16 ft. wood door or a larger Aluminum one piece garage door. Normally 2-4 springs are required to operate a 16 ft. one piece door. This product is perfect for DIY garage door repair.

Technical Details (SL732 32-Inch Lock-End Garage Door Spring)
  • Replacement spring for one piece / tilt-up garage doors
  • Safety containment to prevent it from coming loose
  • Handles 200 - 300 lb.
  • Minimum 1 in. low headroom required
  • Length over coils = 32 in.
  • Outside diameter = 1-5/16 in.
  • Wire diameter gauge = (0.177) #7
  • Initial tension = 110-120 lbs.
  • Maximum allowable stretch = 21.25 in.

Download Holmes spring installation instructions Download spring installation guide >>
Specifications


Share your knowledge of this product. Be the first to write a review »